How To Use; Working Methods - Dreame P10 Pro Benutzerhandbuch

How to Use

Working Methods

Select from two working methods for the vacuum, based on your needs.
Method 1: Discontinuous Cleaning Mode
Press and hold the on/o�� switch to power it on, and release it to stop immediately.
Method 2: Continuous Cleaning Mode (Electronic Lock)
Click the button to switch to Continuous Cleaning Mode and the
release the on/o�� switch to make the vacuum in Continuous Cleaning Mode.
Use the electronic lock to free your ��ngers and avoid ��nger fatigue caused by holding the
switch.
Notes:
• In this mode, brie��y press the switch to suspend the operation or start again， and the
working mode of the vacuum will not change.
• Click the electronic lock again to quit the Continuous Cleaning Mode.
EN
button is on. Then
9