Cleaning Of The Housing And The Bean Hopper; Cleaning Of The Burrs - ECM V-Titan 64 Bedienungsanleitung

Grind the cleaning granules and catch them with the
bean hopper lid for example.
Fill the ground granules back into the bean hopper.
Repeat this process 3 or 4 times. When the granules
turn brown you can throw them out.
Unplug the grinder, take off the bean hopper and clean
the burrs with a brush. You may use a vacuum cleaner
as well.
Clean the bean hopper incl. the lid and set it back onto
the grinder and refill it with coffee beans.
Re-adjust the grind setting.
Grind a portion of beans and throw them out.
Your grinder is operational again.

6.2 Cleaning of the housing and the bean hopper

Occasionally clean the housing and the tray regularly with a damp cloth. You should clean the bean hopper with a
damp cloth prior to refilling the hopper in order to remove coffee oil residues. These residues can negatively effect the
flavor.

6.3 Cleaning of the burrs

It is very tough to unscrew the burr bracket, due to the fine threads. There is a risk of injury.
Please make sure no coffee grounds remain in the threads, since it will not be able to be screwed
back together.
Bedienungsanleitung/ User Manual V-Titan 64 24
ENGLISH