Removing And Installing The Grease Lters; Removing And Installing The Metal-Mesh Grease Lters; Installing And Removing The Activated Carbon Lters - Constructa Cd649550 Gebrauchs- Und Montageanleitung

Removing and installing the grease filters
Before removing and installing the grease
    
lters, always follow the instructions and
warnings in the chapter entitled "Safety
instructions"!
Removing and installing the metal-mesh
grease lters
1. Open the lock and fold down the grease
lters. In doing so, hold the underside of the
grease lters with your other hand.
(for appliances with edge extraction)
2. Clean the grease lters.
3. Reinsert the cleaned grease lters.
26
Activated carbon lters bind the odours in
    
circulating-air mode.
Installing and removing the activated
carbon lters
1. Remove the grease lters (see Removing
and installing the metal-mesh grease lters).
2. Insert the activated carbon lter.
3. Lock the catch.
4. Reinsert the grease lters (see Removing
and installing the metal-mesh grease lters).
Changing the activated carbon lter
Under normal operation (daily 1 to 2 hours)
    
the activated carbon lters must be replaced
approximately 2x year.
The activated carbon lter is available from
    
specialist outlets, customer service or the
Online Shop (see Optional accessories). Use
original lters only.
Activated carbon lters do not contain any
    
pollutants. They can be disposed of in the
household refuse.