Step 2a
• Make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined weight of the equipment and all
attached hardware and components.
WARNING
5
55mm
(2,2")
ø 4,5mm
(ø 3/16")
1
2
Find and mark the
exact location of
mounting holes.
3
Drill pilot holes
√
X
Screw the wall
mount onto
the wall
Deutsch
X
English