Troubleshooting - TaoTronics TT-BH09 Bedienungsanleitung

3) With Bluetooth function on both devices turned on, simply restart the headphone, it
will connect to the last connected device automatically, while the other
device needs to connect manually
4) To switch between the two paired devices, simply pause the music on the rst device
and play music on the second device or vice versa
4. How to Wear
Please wear the headphone as shown in the diagram:
Note:
• Please note the "L" and "R" markings on the headphone, they correspond to left side
and right side respectively.
• In addition to the headphone, two pairs of different size ear buds are included in the
package. Please try them out and nd the most comfortable t for you.
Trouble shooting
Q: My headphone will not switch on.
A: Please recharge it and make sure it has enough power. Plug the unit to a charger
and see if the power button becomes solid red.
Q: Why can't I pair this headphone with other Bluetooth devices?
A: Please check the following points:
• Make sure your Bluetooth device supports A2DP profile
• Make sure the headphone and your device are next to each other or within 3 feet
• You must get the headphone into pairing mode with the indicator flashing
green and red alternately
• Try to reboot your Bluetooth device
Q: After connecting and pairing with my Bluetooth device, I cannot hear any music
from the headphone.
A: Please check the following:
• Your sound system is connected to the headphone (If the LED indicator flashes
green once every 10 seconds then they are connected)
• Make sure the music volume is at audible level on both your
Bluetooth device and headphone
• Make sure your Bluetooth device is playing music
07/08