Connecting; Power Supply - Medion e1210 Bedienungsanleitung

Connecting

Pay attention to the following information, in order to connect your netbook
correctly:

Power supply

•
Do not open the power adapter housing. When the housing is open there is
a danger of severe electric shock. It contains no user-serviceable parts.
•
The electric outlet must be in the vicinity of the netbook and within reach of
the power adapter cables.
•
To disconnect your netbook from the power source, or set the netbook to
battery operation, remove the power cord from the netbook's power socket.
•
Only use the netbook with a power adaptor operating at
AC 110-240V~/50-60 Hz. For details on power consumption, please refer to
the rating plate on the rear of your netbook. If you are unsure of the type of
power supply available at the point of use, ask your local power company.
•
Use only the supplied power cord and power adapter.
•
If using an extension cord, make certain that it meets your local safety
requirements. If in doubt, consult an electrician.
•
To provide additional protection against electric shock, power surges,
lightning strikes, or other electrical damage to your netbook, we
recommend the use of a surge protector.
•
Firstly remove the plug, and then the connector of the netbook, from the
power source, if you want to detach the network adapter from the mains
power supply. A reverse sequence could damage the network adapter or the
netbook. Always hold the connector firmly when removing it. Never pull on
the power cord.
7
Safety Instructions