Connecting
Pay attention to the following information, in order to connect your device correctly:
Power supply
•
Do not open the power adapter housing. When the housing is open there is a danger of severe electric shock. It
contains no user-serviceable parts.
•
The electric outlet must be in the vicinity of the device and within reach of the power adapter cables.
•
Only use the device with a power adaptor operating at AC 100-240V~, 50/60 Hz. For details on power consump-
tion, please refer to the rating plate on the rear of your device. If you are unsure of the type of power supply avail-
able at the point of use, ask your local power company.
•
To disconnect your notebook from the power source, or set the notebook to battery operation, remove the power
cord from the notebook's power socket. Never pull on the power cord.
•
Do not cover the power supply unit, in order to avoid damage through unacceptable warming.
•
Stop using the power supply unit if the housing or the feed line to the device is damaged. Replace it with a power
supply unit of the same type.
•
To avoid power consumption when the device is switched off either pull out the power plug when the device is not
used or connect the device to a master-/slave power bar.
•
Use only the supplied power cord and power adapter.
•
If using an extension cord, make certain that it meets your local safety requirements. If in doubt, consult an electri-
cian.
•
To provide additional protection against electric shock, power surges, lightning strikes, or other electrical damage to
your device, we recommend the use of a surge protector.
Safety instruction
DE
EN
FR
NL
DK
ES
PT
5