General Safety Instructions For Power Tools - IKEA FIXA Übersetzung Der Originalbetriebsanleitung

ENGLISH
FIXA Cordless screwdriver
TECHNICAL SPECIFICATIONS
Charger input voltage: Local input voltage
Charger output voltage: 5Vd.c.
Battery voltage/battery type:
3.6 V lithium-ion battery
Charging time: 5-8 hours
Max. torque: 3 Nm
Max no load speed: 200 rpm
Bit holder: 6.35 mm (1/4")
Vibration (according to EN 60745-1,
EN 60745-2-1, EN 60745-2-2):
Screwdriving without impact:
ah=0.307 m/s², K=1.5 m/s².
Noise (according to EN 60745-1):
Noise pressure level Lpa = 62.97 dB (A),
Kpa = 3 dB (A)
Noise power level Lwa = 73.97 dB (A),
Kwa = 3 dB (A)
LIST OF FEATURES
The numbering of the product features
shown refers to the illustration no. 1 on the
graphic page.
1. Screwdriver main body.
2. Screwdriver bit holder.
3. Forward/reverse switch.
4. Charging socket.
5. Charger.
Intended use
The electric screwdriver is suitable for the
insertion and removal of screws.
GENERAL SAFETY INSTRUCTIONS
General safety instructions
for power tools
WARNING!
Read all safety warnings and
all instructions. Failure to follow all the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated
(cordless) power tool.
Work area safety
a. Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b. Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust of
fumes.
c. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety
a. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
4