Laserworld RTI NEO SIX RGB 2 Bedienungsanleitung Seite 12

Manual: RTI NEO SIX RGB 2
The offset for green changes the threshold current flowing when the DMX value for green
modulation becomes greater than 0. The possible value is limited to the range of 57600
– 63000. Green is the most sensitive diode and the threshold current varies a lot bet-
ween the diodes. It changes the maximum Iop at the same time since the whole current
frame will be shifted up or down.
By pressing the middle button the channels can be switched from 1 to 6 depending on
what output needs to be changed:
The offset for blue changes the threshold current flowing when the DMX value for blue
modulation becomes greater than 0. The possible value is limited to the range of 52600 –
60000. It changes the maximum Iop at the same time since the whole current frame will
be shifted up or down.
By pressing the middle button the channels can be switched from 1 to 6 depending on
what output needs to be changed:
The gain for red changes the maximum current flowing when the DMX value for red is set
to 255. The possible value is limited to the range of 6500 - 9500. Always use a power meter
when changing this value and start with a low DMX channel value like 100.
By pressing the middle button the channels can be switched from 1 to 6 depending on
page 12 / 30