System Settings; Balance Setting; Screen Brightness - T+A Elektroakustik DAC 8 DSD Betriebsanleitung

Operating the
menu
Menu item
BAL
(Balance)


Menu item
BRGT
(Screen
brightness)

System settings

Direct operation on the DAC 8 DSD:

Call up the menu by holding the  button pressed in.

When the menu is open you can select a menu point by briefly
pressing the  button again, repeatedly if necessary.

The selected menu point can be adjusted using the volume
-  + .
buttons

Once you have set the desired value, hold the  button
pressed in again to close the menu.
Operating the menu using the FM8 remote control handset:

The menu is called up by briefly pressing the  button.

Use the  /  to select a menu point.

You can alter the selected menu point using the  / 
buttons.

Once you have made an alteration, press the  button to
accept the new setting.
This menu item is used to alter the balance level between the left and
right channel, e.g. to compensate a non-symmetrical loudspeaker
positioning. The balance can be adjusted in 16 steps (increments of
1,25 dB) for the left (Indicator "L") or the right (Indicator "R") channel;
the screen displays the current value.
This menu item appears only if the volume control is switched on. This
is accomplished by setting the switch on the back of the DAC 8 DSD to
'VRBL'.
This menu point only appears if you opened the menu using the
 button on the front panel of the DAC 8 DSD.
The screen brightness can be adjusted in eight stages to suit your
personal preference; a further option is to switch off the screen
completely. The change in brightness simultaneously affects the
screen, the illuminated symbols and all the source and status LEDs,
with one exception: when screen brightness is set to "fully off", the
"ON" LED is not switched off completely, so that the machine's
operating status is still evident.
47