Remote Control - T+A Elektroakustik DAC 8 DSD Betriebsanleitung

42

Remote control

General Information
In general terms the remote control buttons have the same function as
the corresponding buttons on the DAC 8 DSD front panel.
The infrared sensor for the remote control system is located in the
display area of the DAC 8 DSD. There must be clear line-of-sight contact
between the FM8 handset and the screen.
The following tables show the remote control buttons and their
functions when operating the machine.

A brief press switches the DAC 8 DSD on.
Hold the button pressed in to switch the device off.

A brief press when the machine is operating switches
the outputs off and on (Muting).

Buttons for source selection

Toggles between the co-ax inputs S/P-DIF 1 and S/P-
DIF 2.

Toggles between the co-ax inputs S/P-DIF 3 and S/P-
DIF 4.

Toggles between the optical input OPT and the co-ax
input BNC.

Toggles between the USB input and the balanced
AES/EBU input.
-  +
Increases / decreases the volume
(only possible when the switch on the back of the
DAC 8 DSD is set to "VRBL", or when headphones are
connected)

Navigation

Selects the next point within a list / select button

Selects the previous point within a list / select
button

Returns to the previous point / change button

Confirms the input / change button

Confirmation button during input procedures

Brief press:
Opens the menu for Tone settings and D/A
converter settings
Long press:
Opens the menu for system settings