Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Occupation of the DIP switches:
..............................................................................................................................................................................
6
INSTALLATION
Place the machine on a plane surface or mount it via its bracket.
• Install the device in a well-ventilated area. The operation in an insufficiently ventilated room can lead to a
condensation of the fog fluid. The resulting slippery surface can cause accidents.
• Keep a minimum distance of 20 cm around and above the device.
• Furthermore, do not orientate the escape nozzle directly in the direction of the audience's eyes. In order to
create a good effect, there should be a distance between the device and the audience of at least 1.5 m.
• Only install the fog machine on scratch resistant and water resistant surfaces.
• Please make sure that the inclination angle does not exceed 15°.
Mounting Bracket
Screw the mounting bracket to the machine using the included set of screws. Place the washers on the
inside of the bracket and adjust the desired inclination angle. Tighten the fixation screws.
www.eurolite.de
25
Werbung
Inhaltsverzeichnis
