Connecting The Appliance To The Power Supply; Electrical Connections - AEG MC2665E Benutzerhandbuch

9.2 Connecting the appliance to the power supply
9.3 Electrical connections
WARNING!
THIS APPLIANCE MUST BE
EARTHED
The manufacturer declines any liability
should this safety measure not be
observed.
(A)
• The electrical outlet should be readily
accessible so that the unit can be
unplugged easily in an emergency.
Or it should be possible to isolate the
oven from the supply by
incorporating a switch in the fixed
wiring in accordance with the wiring
rules.
• The socket should not be positioned
behind the cupboard.
• The best position is above the
cupboard, see (A).
• Connect the appliance to a single
phase 230 V/50 Hz alternating
current via a correctly installed earth
socket. The socket must be fused
with a 10 A fuse.
• The power supply cord may only be
replaced by an electrician.
• Before installing, tie a piece of string
to the power supply cord to facilitate
connection to point (A) when the
appliance is being installed.
• When inserting the appliance into the
high-sided cupboard, DO NOT crush
the power supply cord.
• Do not immerse the power supply
cord or plug in water or any other
liquid.
If the plug that is fitted to your appliance
is not suitable for your socket outlet, you
must call your local AEG service agent.
ENGLISH 153