Repair Service; Waste Disposal And Environmental Protection; Spare Parts; Warranty - Ikra KSE 2100 Gebrauchsanweisung

Attention: Any maintenance or repair work go-
ing beyond that described in these Operating
Instructions may only be carried out by author-
ised persons or the works after-sales service.
Attention: If the power supply lead of this
device shows any defects, the lead must be
replaced by an authorized repair shop only
or through the manufacturer's own service
personnel, as this work requires special tools.

11. Repair Service

Repairs to electric power tools should only be carried out
by specialist electrical personnel.
12. Waste disposal and environmental protec-
tion
If your chain saw should become useless somewhere
in the future or you do not need it any longer, do not
dispose of the device together with your domestic refuse,
but dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according
collecting/ recycling point. By doing so, plastic and
metal parts can be separated and recycled. Information
concerning the disposal of materials and devices are
available from your local administration.

13. Spare parts

Bar (35
0 mm)
Chain (
350 mm)
Bar (
400 mm)
Chain (
400 mm)
Bar (
450 mm)
Chain (
450 mm)

14. Warranty

For this electric tool, the company provides the end
user - independently from the retailer's obligations re-
sulting from the purchasing contract - with the following
warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by
the original purchasing document. For commercial use
and use for rent, the warranty period is reduced to 12
months. Wearing parts and defects caused by the use
of not fitting accessories, repair with parts that are no
original parts of the manufacturer, use of force, strokes
and breaking as well as mischievous overloading of the
motor are excluded from this warranty. Warranty replace-
ment does only include defective parts, not complete
devices. Warranty repair shall exclusively be carried
out by authorized service partners or by the company's
customer service. In the case of any intervention of not
authorized personnel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
GB | Operating Instruction
Art.-Nr. 27111561
Art.-Nr. 27111011
Art.-Nr. 27111063
Art.-Nr. 27110996
Art.-Nr. 27111091
Art.-Nr. 27111072

15. EC Declaration of Conformity

We, MOGATEC Moderne Gartentechnik GmbH, Im
Grund 14, 09430 Drebach, declare under our sole
responsibility that the products KSE 2000, 2150 2400,
to which this declaration relates correspond to the rel-
evant basic safety and health requirements of Directives
2006/42/EC (Machinery Directive), 2004/108/EC (EMV-
Guideline), 2011/65/EU (RoHS-Guideline) and 2000/14/
EC (noise directive) incl. modifications. For the relevant
implementation of the safety and health requirements
mentioned in the Directives, the following standards and/
or technical specification(s) have been respected:
DIN EN 60745-1 (VDE 0740-1):2010-01
EN 60745-1: 2009
DIN EN 60745-1 Ber.1 (VDE 0740-1 Ber.1):2010-04
EN 60745-1 Corr.: 2009
EN 60745-1/A11:2010
DIN EN 60745-2-13 (VDE 0740-2-13):2011-07
EN 60745-2-13:2009+A1:2010
DIN EN ISO 12100:2011-03
EN ISO 12100:2010
DIN EN 55014-1 (VDE 0875-14-1): 2010-02
EN 55014-1:2006+A1:2009
DIN EN 55014-2 (VDE 0875-14-2):2009-06
EN 55014-2:1997+A1:2001+A2:2008
DIN EN 61000-3-2 (VDE 0838-2):2010-03
EN 61000-3-2:2006+A1:2009+A2:2009
DIN EN 61000-3-11 (VDE 0838-11):2001-04
EN 61000-3-11:2000
EN 62233:2008
Anforderungen der Kategorie I / Requirements of
category I; Engineering type licence No.
1028 MSR, VDE Offenbach
The year of manufacture is printed on the nameplate and can be addition-
ally retrieved via the consecutive serial number.
measured acoustic capacity level 102,3 dB(A)
granted acoustic capacity level
Conformity assessment method to annexe V / Directive
2000/14/EC
Münster, 07.02.2014
Gerhard Knorr, Technical Management Ikra GmbH
CE Conformity Officer Mogatec GmbH
Maintenance of technical documentation: Gerhard Knorr, Kärcherstraße
57, DE-64839 Münster
GB-9
104,0 dB(A)