Bosch Uneo Originalbetriebsanleitung Seite 13

OBJ_BUCH-605-005.book Page 13 Tuesday, March 19, 2013 10:07 AM
wood, metal, ceramic and plastic. Machines with electronic
control and right/left rotation are also suitable for screwdriv-
ing.
Use the battery charger only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 SDS-Quick tool holder
2 Dust protection cap
3 Locking sleeve
4 Selector switch for drilling/hammer drilling
5 Battery charge-control indicator
6 Indicator for right rotation
7 Indicator for left rotation
8 Rotational direction switch
9 On/Off switch
10 Universal bit holder*
11 Screwdriver bit*
12 Screwdriver bit with ball catch*
13 Drill bit with hexagon shank*
14 Drill bit with SDS-Quick tool holder*
15 Handle (insulated gripping surface)
16 Socket for charge connector
17 Charge connector
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless Rotary Hammer
Article number
Rated voltage
Rated speed
Impact rate
Impact energy per stroke ac-
cording to EPTA-Procedure
05/2009
Tool holder
Max. drilling dia.
– Concrete (with twist drill)
– Steel
– Wood
Weight according to
EPTA-Procedure 01/2003
Battery Charger
Article number
Charging time
Bosch Power Tools
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 84 dB(A); Sound power level 95 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Hammer drilling into concrete: a
Drilling into metal: a
Screwdriving: a
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
(battery powered products) and EN 60335 (battery charg-
Uneo
ers) according to the provisions of the directives
3 603 J52 0..
2011/65/EU, 2006/95/EC, 2004/108/EC, 2006/42/EC.
V= 14.4
Technical file (2006/42/EC) at:
-1
min 0–900
Robert Bosch GmbH, PT/ETM9
-1
min 0–4800 D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
J 0.5
Senior Vice President
Engineering
SDS-Quick
mm 10
mm 8
mm 10
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
19.03.2013
kg 1.1
Assembly
2 607 225 463 (EU)
 Before any work on the machine (e. g., maintenance,
2 607 225 465 (UK)
2 607 225 641 (AU)
h 3
(triax vector sum) and uncertainty K
h
=20 m/s
h
2
=4.0 m/s , K=1.5 m/s
h
2
=2.5 m/s , K=1.5 m/s
h
08
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
English | 13
2 2
, K=1.5 m/s ,
2
,
2
.
2 609 007 217 | (19.3.13)