Legamaster MOTION EASY Kurzanleitung Zur Installation Seite 40

(EN)
• When using it for the first time, you need to press the down button 5
seconds to reset.
• After the reset starts, the columns automatically drop to the lowest point
and then automatically rebound 7mm. This means 'reset complete'.
• If it goes to the bottom and bounces 50mm,
it needs to be forced to reset. Proceed as follows:
* Press the down button for 10 seconds.
* The column goes to the bottom and rebounds 50mm.
* Then keep pressing the down button for 5s to reset,
* When the column descends to the bottom and rebounds 7mm,
the reset is complete).
• Use the controller to rise the stand, ensure it functions normally, and
observe the length of the AC cable to ensure that it will not be pulled.
22
max. 86"
max 100kg
40