Multiblitz PROPAC-1 Bedienungsanleitung Seite 13

PROPAC
ChARgIng The PROPAC
1) LOW BATTeRY:
Switch off and disconnect your Profi lux Plus / X10 unit(s) in order to charge the battery pack.*
2) Re-ChARgIng The BATTeRY PACk:
Switch off your Propac and connect the multi-voltage charger. Ccharging time: Propac 1 = 4 hrs, Propac 2 = 4,5 hrs**
3) BATTeRY ChARgeD
4) BATTeRY ChARgeD:
Disconnect the multi-voltage charger. The Propac indicates
a full battery after it is being switched on.
* A soon as the red LED of the battery level indicator starts
blinking, the Propac should be turned off and recharged
promptly. Otherwise, the Profi lux Plus unit(s) will cut-out
automatically (deep discharge protection).
** Re-charging the Propacs for ten hrs will result in
a 25% gain of fl ash capacity.
13