Multiblitz PROPAC-1 Bedienungsanleitung Seite 12

EN
USER'S GUidE.
COnneCTIOn OF LAMP CABLe
AnD MuLTI-VOLTAge ChARgeR.
1) Align plug and socket, see arrows.
2) Connect plug to socket.
3) turn plug right until it snaps in.
15 SeC AuTO-OFF" MODe
The modeling-Llght on-off button/100% on-off button will blink
when the unit switches to "auto-off" mode after not being fi red for
15 sec. Also refer to the "Profi lux Plus User's Guide", page 8, point
4 and "XSystem User's Guide", page 3, point 1b.
12
2
1
3
Additional visual indications on
a Profi lux Plus / X10 unit when
operated with a Propac.
LOW BATTeRY
The display will indicate "LO" as soon as a
the Propac reaches a critical state of charge.
See „1) Low Battery" on the following page.