Technical Data - Multiblitz PROPAC-1 Bedienungsanleitung

PROPAC

TeChnICAL DATA

PRoPAc
lAMP SocKEtS:
(SPlASh PRooF)
FoR PRoFilUx PlUS UNitS
obtAiNAblE PERFoRMANcES:
with 1 PRoFilUx PlUS UNit
obtAiNAblE PERFoRMANcES:
with 2 PRoFilUx PlUS UNitS
ModEliNG liGht oPERAtioN:
with "AUto-oFF" FEAtURE*
NUMbER oF FlAShES:
with 1 x PRoFilUx PlUS 200
At FUll oUtPUt**
with 1 x PRoFilUx PlUS 400
At FUll oUtPUt**
with 1 x PRoFilUx PlUS 600
At FUll oUtPUt**
REcycliNG tiME:
with 1 ANd 2 PRoFilUx PlUS 200
At FUll oUtPUt
with 1 ANd 2 PRoFilUx PlUS 400
At FUll oUtPUt
with 1 ANd 2 PRoFilUx PlUS 600
At FUll oUtPUt
REchARGE tiME
At 110 v / 230 v:
(NAch vollER ENtlAdUNG)
diMENSioNS (w x l x h):
wEiGht:
* If a unit isn´t fired for 15 sec., the modeling light switches off
automatically in order to preserve battery power. It turns on again
after the unit is fired.
** Propac fully charged, without modeling-light, flash count halves
with two units connected.
Tolerances of the technical data for measured values and components according to the standard DIN IEC // Subject to technical changes
1
2
max. Ws 200 / 400 / 600
400 / 600 / 800
max. Ws 1000 / 1200
Yes
count 1400
count 700
count 350
sec 0.9
sec 1.8
sec 3.2
hrs 4
mm 166 x 219 x 210
kg 8.8
PROPAC 1
2
2
Yes
3200
1600
800
0.9
PROPAC 1
1.8
3.2
4.5
166 x 219 x 296
12.0
11