Audisse shokunin Kurzanleitung Seite 25

FM RADIO
Operating in FM mode
Carefully adjust the rod antenna and press the Power button to switch on Audisse
Shokunin.
Press the Source button as needed to select FM radio mode.
Rotate the Tuning/Seek/Select control in a clockwise direction. The displayed
frequency will increase. Press the Tuning/Seek/Select control to carry out an auto-
tune. Your radio will scan up the FM band from the currently displayed frequency and
will stop scanning when it finds a station of sufficient strength.
The display will show the frequency of the signal which has been found. If RDS
information is available, after a few seconds the display will show the radio station name.
If you only hear hiss or interference, simply press the Tuning/Seek/Select control to
scan further. Audisse Shokunin may have found a spurious interference signal.
GB
24