Audisse shokunin Kurzanleitung Seite 23

If this is the first time, the display will show 'Scanning'. (If the sound system has been
used before the last used station will be selected instead.)
During the scanning process, as new stations are detected the station counter will
increase and the stations will be added to the list which is stored in the sound system.
The bar graph indicates the progress of the scan.
When scanning is completed the radio will list the stations found (in numeric-alpha order
0....9...A...Z), unless it has previously been tuned to a DAB station.
Rotate the Tuning/Seek/Select control to scroll through the list of available DAB radio
stations.
Press the Tuning/Seek/Select control to select the highlighted station. The display may
show 'Connecting...' while the radio re-tunes.
Use the Volume control to set the sound level as needed.
If the station list is still empty after the scan the display will show 'Service not available'.
If no stations are found it may be necessary to relocate Audisse Shokunin to a position
giving better reception.
GB
22