Audisse shokunin Kurzanleitung Seite 13

When the sound system finds your wireless network, it displays the Network Name
(SSID) for the wireless access point on the screen. This is a name that is allocated to
the access point in your router by the person who set up the network - for example:
'Wilson' or 'Jame's group'. If the router supports WiFi Protected Setup, then '[WPS]' will
be shown in front of the SSID.
It is possible, and in some locations highly likely, that Audisse Shokunin will find more
than one wireless network, in which case you should choose which one you need to
connect to.
Rotate the Tuning/Seek/Select control to see the SSID for each wireless network
that has been found. If your network is shown proceed to step 6. If it is not shown then
proceed to step 5.
If you make a mistake at any point, use the Back button to go back to the previous
screen.
If your network is not found, it may be because the router is configured not to broadcast
the SSID. You should then use the Tuning/Seek/Select control to highlight and select
the '[Manual config]' option in order to enter the network details manually. This is
described in 'Manual Network Configuration'.
If your network name is being broadcast, and it was not found, then try re-scanning (press
the Back button), and if necessary try moving Audisse Shokunin to a location closer to
your access point / router.
GB
12