Azdome M01 Pro Bedienungsanleitung Seite 4

4.BUTTON CONTROLS
OPERATION AND FUNCTION
BUTTON
1.Select function options in setup mode.
2.In recording mode, press once to switch front and rear
recording.
Press once to enter menu setting
1.Select function options in setup mode.
2.In recording mode, press once to the sound recording.
1.In recording mode, press once to start recording, press one
more time to stop recording.
2.Long press once to shoot photos when recording.
3.Press once to confirm your setting in settings mode.
1.Press once to shift between Video / Photo / Lock Video
playback mode.
2.Press once to return to previous page in playback mode.
In recording mode, press once to lock the video as an
emergency one.
1.Press once to turn on the device
2.Press once to lock the screen
3.Press and hold to turn off the device
Recording status: Blue light flashes (one flash per second).
REC
Not recording status: Blue light is steady on.
RESET
Reboot the device and default settings
Note:
1. We recommend using AZDOME SD cards for optimal performance. If you
need one AZDOME SD card, not included in the packaging, on Amazon
search AZDOME SD card.
2. Using third party or unqualified SD cards can affect dashcam's performance
and in some cases, force the dashcam to reboot randomly during recording.
3. Be sure to format your microSD card with your dash cam for the first time
use.
EN-03
5. DASH CAM INSTALLATION
Ideal Mounting Area
1. Insert the Micro SD card into the Micro SD slot of the dash cam and format
your SD card for the first time use.
2. Slide the mount into the mount installation slot.
3. Turn off the car engine.
4. Stick the car mount together with the camera onto your windshield.
5. Connect the USB charging cable to the Type-C port of the dash cam. Run
the cable along the edge of the windshield. Tuck away in the seams and
extend it all the way to the USB port of the car charger. Be sure to keep it away
from the airbag area.
6. Adjust the dash cam to keep the lens level with the ground.
7. Start the engine to check if the dash cam works properly.
8. To remove the mount, press and hold the Mount Release Button then pull
the mount out of the slot.
1
2 Connect to Car Charger
EN-04