Safety warnings
Only use the remote control when you have full visibility of the parking lock.
Do not leave the remote control within reach of children.
Do not use the remote control if a person, animal or object is in the lifting/lowering area
of the parking lock.
Do not modify or repair the remote control yourself.
Periodically check the operation of the remote control and the battery status.
Keep the remote control away from sources of excessive humidity or heat.
The remote control is only compatible with the PNI PL10 and PNI PL20 parking locks.
Remote control pairing
Connect the power plug between the motor and the battery compartment. A beep will
be heard. Press the Down key on the remote control, then press the Up key. The remote
control has now been paired.
PNI parking locks support the pairing of a maximum of 10 remote controls.
Technical specifications
Power supply
Frequency
Transmission power
Working temperature
Simplified EU Declaration of Conformity
ONLINESHOP SRL declares that the PNI RCPL10 additional remote control for the PNI
parking lock complies with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/
EU. The full text of the EU declaration of conformity is available at the following internet
address:
https://www.mypni.eu/products/11017/download/certifications
User manual
3V CR2032 battery (included)
433 MHz
10 mW ERP
-26°C ~ 80°C
3
English