Safety Warnings - Pni Rc1200 Bedienungsanleitung

Safety warnings

Only use the remote control when you have full visibility of the garage door.
Do not leave the remote control within reach of children.
Do not use the remote control if a person, animal or object is in the opening/
closing area of the door.
Always watch the door while it is closing or opening. Stop immediately if
an obstacle appears.
Do not modify or repair the remote control yourself.
Periodically check the operation of the remote control and the battery
status.
Keep the remote control away from sources of excessive humidity or heat.
The remote control is only compatible with the PNI AGD1200 garage door
automation kit.
Pairing/Deleting the remote control
Note: the remote controls in the PNI AGD1200 garage door automation kit
package are paired at the factory.
Press the "CODE" button on the opening system motor and release it when
the red dot on the screen lights up.
Press a button on the remote control, then release it and press it again.
The red dot on the screen will flash to confirm that the code has been
received.
Repeat step 1 to program up to 25 remote controls.
To delete all registered remote controls, press and hold the "CODE" button
until the red dot on the LED screen starts flashing. Continue to press and
hold for more than 8 seconds until the LED screen displays the letter C.
Now all remote controls have been deleted.
User manual 3 English