HOMCOM VOG52 Handbuch Seite 5

REFILL WARNING
● Before refilling the burner, ensure there is no longer any visible flame on the
surface.
● Note: The flame may be difficult to see, so ensure it is fully extinguished.
● WARNING! Never attempt to refill a burner that is still burning. It is crucial to wait at
least 30 minutes for the burner to cool down before refilling it.
EXTINGUISHING THE FLAME
● To extinguish the flame, use the extinguisher tool that is provided in the package.
Keep the fire extinguishing tool at least 140mm (5.5 inches) away from the flame.
●
CAUTION: Never extinguish the flame with water.
● CAUTION: Never blow out the flame to put it out, as this can increase the flame.
● Before reigniting, allow the flame to burn out completely. This prevents fuel residue
and potential fire hazards.
● Fire will extinguish when fuel burned out (about 3 hours depending on the fuel).
● To extinguish the flame before the fuel has burned out, use the extinguisher tool to
fully close the opening of the burner and wait for the flame to be extinguished.
● If the flame is not immediately extinguished, close the cover and wait
approximately 10-15 minutes for the flame to cool down. Repeat these instructions
until the frame is fully extinguished.
● CAUTION: The appliance will remain hot when lit and may stay hot for a while after
the flame has been extinguished. Handle with caution.
● It is recommended to let the appliance burn until all the fuel has been consumed.
MAINTENANCE AND CLEANING INSTRUCTIONS
● Please sure to shut-down the appliance before maintenance or cleaning.
● Use a wet cloth to clean the inside surface of the appliance. The burner may
change color due to heat, and the stainless steel may have a different appearance over
time. Regular maintenance will help preserve its color.
● Do not clean with water or put in a dishwasher.
● For cleaning, wipe across the slot and surface of the burner with a small amount of
Bioethanol on a paper towel.
● CAUTION: Never use chemicals, steel wool or scrubbing sponges as they can
scratch the surface. The manufacturer is not responsible for any damages resulting
from improper use or cleaning.
● Repair, replacement of major parts and work on safety elements must be done by
approved specialists recognized by the manufacturer or importer. Certain components
are essential for product safety and can affect performance.
● During maintenance or repair, use only original components recognized as
equivalent.
● Regularly check the appliance, especially in winter. Keep the burners empty when
not in use.
Manufacturer:
Jinhua Sunyoung Technology Co.,Ltd
No.568, Chongwen street, Lingxia town, Jinhua, Zhejiang, China
CAUTION: Do not directly touch the surface of the
burner It can be extremely hot.
4