Safety Instructions; Cleaning - Soehnle Dual 7196 Bedienungsanleitung

3. General notes

3.3 Safety instructions

This scale is designed for professional use.
The user must be familiar with the operation of the scale.
Please read the information in the instruction manual carefully before using the appliance. It contains
important instructions for the installation, the intended use and the maintenance of the unit. The
manufacturer is not liable if the following instructions are not observed. Improper installation will
invalidate the warranty. When using electrical components under increased safety requirements, the
corresponding regulations must be observed.
The Compact scale Dual 7196 must not be used in potentially explosive atmospheres.
f
The permissible mains voltage is 100 - 240 volts. Electrical connection conditions must
f
correspond to the values printed on the type plate.
The terminal may only be opened by trained Soehnle Industrial Solutions service technicians.
f
There are no user-serviceable parts in the housing.
If the mains cable is damaged, do not continue to operate the scale. Disconnect the power supply
f
and call a Soehnle Industrial Solutions service centre.
If the scale is used in legal metrology, the attached security marks must not be damaged.
f
This unit is radio interference suppressed in accordance with the applicable EC directive. However,
f
under extreme electrostatic and electromagnetic influences, e.g. when operating a radio or mobile
phone in the immediate vicinity of the unit, the display value may be affected. After the
interference has ceased, the product can be used again as intended; if necessary, it must be
switched on again. In the event of permanent electrostatic interference, please contact the
responsible Soehnle Industrial Solutions service partner.
The device is a measuring instrument. Draughts, vibrations, rapid temperature changes and
f
exposure to sunlight may affect the weighing result.

3.4 Cleaning

Always disconnect the scale from the power supply before cleaning.
Clean the scale as necessary with household cleaning agents. Make sure that no liquid enters the
terminal. Wipe with a dry, soft cloth.
Never use abrasive or aggressive cleaning agents for cleaning. These agents can damage the scale.
28