First Time Use; Cleaning; R-Net Switch Control Connection - Mo-Vis R-Net Switch Control Benutzerhandbuch

First time use

CAUTION: A qualified service engineer should assist during first time use of the
device and make sure that all functions are clear to the user, including what to do in
case of problems or doubt.

Cleaning

Regular maintenance of the device is required. Before you do this, always disconnect the
device.
• Gently remove dust and dirt with a damp cloth.
• Use only non-aggressive disinfectant cleaning agents.
CAUTION:
Do not immerse in water or use excessive amounts of liquid.
CAUTION:
Make sure the device and its buttons stay clean, so activation remains
possible at all times.
CAUTION:
If the device or a connected button is damaged, it must be replaced
immediately to ensure correct functionality.

R-net Switch Control Connection

The R-net Switch Control includes a Joystick Interface R-net Switch.
That interface has an R-net bus cable.
You can connect 1 or 2 switches to the unit:
Red = power on/off
•
Yellow = profile/mode
•
WARNING:
to instantly stop the wheelchair in case of problems or an emergency.
16
The on/off switch must be available to the user at all times. This allows
R-net Switch Control User manual