Qualifications - Mo-Vis R-Net Switch Control Benutzerhandbuch

NOTE:
There are no mounting screws included in the package as we don't know
where it will be mounted. We recommend using d:3mm plastic screws. Depending
on where you mount the P034-50, it is recommended to adjust the screw length.
Please refer to
dimensions of the mounting holes.
Optional
We recommend using a Twister Pro for driving and actuator functions. For more
information about the Twister Pro and the mounting options, please refer to the User
Manual and Installation Manual of that device.
We also have a variety of 'normal open' Twisters available, that can be used for the auxiliary
wheelchair functions. For more information on these devices, please refer to the User
Manual of the Twister.

Qualifications

CAUTION:
Only a qualified service engineer may install the device.
CAUTION:
An incorrect programming of the wheelchair or device electronics, may
cause damage to the devices or injury to the user.
R-net Switch Control User manual
Dimensions on page 17 for more information on the position and
15