Mo-vis R-net Switch Control Benutzerhandbuch Seite 12

NOTE:
The outputs are isolated from the wheelchair electronics. Each output is
able to handle a maximum continuous current of 75 mA and a peak current of
350 mA.
CAUTION:
component failure. So the outputs cannot be used for safety-critical purposes.
Some interesting features of the R-net Switch Control:
• Multiple buttons can be activated at the same time.
• Actuators can be controlled in toggle mode.
• Combi seat functions can be controlled by a button.
• Smooth driving with switches, thanks to the Shaping parameter. See Installation
Manual.
• You don't need a Curtiss-Wright Omni(2) to drive with switches.
• Joystick drivers who have difficulty driving into or out of an elevator/car can use the
buttons of the R-net Switch Control to only drive straight forward/backward.
• •
With the R-net Switch Control you can have multiple functions. A few examples:
Example 1: Connect 1 button to the External Profile Switch Jack of the JSM for the
•
function Profile/mode select + Connect 1 button to the first input jack of the R-
R-net Switch Control User manual
The R-net Switch Control does not contain a double check against
11