Nacon RIG 600 MAX HS Bedienungsanleitung Seite 8

EN /
• Bluetooth:
To pair your headset with a Bluetooth device, make sure to:
- Press and hold the Mode button for more than 6 s, until you
hear the prompt voice say: "Pairing Bluetooth". The headset's
LED will flash blue during the pairing process.
- Open the Settings menu on your mobile device and go to the
Bluetooth setting. Then, turn on the Bluetooth connection.
Look for RIG 600 MAX in the list of devices and connect to it.
If pairing is successful, you will see the message on your device but
you will also hear a prompt voice say through the headset:
- "Bluetooth connected" in Dual mode,
- "Connected" in Bluetooth mode.
When pairing is unsuccessful, you will hear the prompt voice say:
"Bluetooth pairing failed".
In this case, turn off your device's Bluetooth connection and power off
the headset. Then, repeat the pairing process, making sure the above
conditions are met.
WARNING: When in Dual mode, your headset is connected to both a
USB-C dongle and a Bluetooth device. However, one communication
will take priority over the other.
If you answer an incoming call, for instance, the communication with the
USB-C dongle will stop and the incoming call will be heard.
When the call is complete, the headset will automatically switch back to
the USB-C dongle.
I Multi-function button
With a single press of this button, you can:
• Play/Pause your music when your communication is activated.
• Answer an incoming call when your communication is activated.
Your headset remembers the last connected Bluetooth device, so
you won't need to set it up again, even if you switch modes or power
on/off your headset.
With a short press (3 s) of this button, you can:
• Activate your mobile device's voice assistant, when connected
to Bluetooth.
• Reject a call.
I How to customize your experience?
If you want to go deeper into your headset customization, please
download the Companion APP RIG 600 MAX from Google Play (for
Android devices) and App Store (for iOS devices).
8