Fuel Supply - Riello Guliver Rg3D Betriebsanleitung

3.3

FUEL SUPPLY

The burner is designed to allow entry of the oil supply pipes on either side.
Depending on the oil supply pipes position (to the right or to the left hand side of the burner) the fixing plate
(1) and cable clamp (2) should be reversed, (see fig. 6).
1
3.4 ELECTRODES ADJUSTMENTS,
ATTENTION
MEASURES MUST BE
RESPECTED
Lean the diffuser disc-holder as-
sembly (1) on the nozzle-holder (2)
and lock it by screw (3).
For prospective adjustments loos-
en screw (4) and move the elec-
trodes assembly (5).
To have access to the electrodes
carry out operation as described in
chapter "4.4 MAINTENANCE POSI-
TION" (page 9).
3072
Fig. 6
2 2
(see fig. 7)
0
4,5
– 0,5 mm
4
5
3
D5341
5
GB
2 1
6 ÷ 7
1
D5345
Fig. 7
mm