Hisense RT326N4EW1 Benutzerhandbuch Seite 37

Stand your appliance in a
●
dry place to avoid high
moisture.
Keep the appliance out of
●
direct sunlight rain or frost.
Stand the appliance away
from heat sources such as
stoves, fires or heaters.
Leveling of appliance
For sufficient leveling and
●
air circulating in the lower
r e a r s e c t i o n o f t h e
appliance, the bottom feet
may need to be adjusted.
Yo u c a n a d j u s t t h e m
manually by hand or by
using a suitable spanner.
To allow the doors to self-
●
close, tilt the top backwards
by about 10mm.
Reversing the door
The side at which the door
opens can be changed,
from the right side (as
supplied) to the left side, if
the installation site requires.
≤10mm
Hisense Refrigerator
Warning! When reversing
the door, the appliance
must not be connected to
the mains. Ensure that the
plug is removed from the
mains socket.
Tools you will need
8mm socket wrench
Thin-blade screwdriver Monkey wrench
Note: Before you start lay
the refrigerator
in order to gain access to
the base you should rest
,
it on soft foam packaging
or similar material to avoid
damaging the backboard
of the refrigerator. To
reverse the
f o l l o w i n g s t e p s
generally recommended
1. Stand the refrigerator
upright Open the upper
.
door to take out all door
racks (to avoid
sdamaged) and then close
the door
.
8
Cross-shaped screwdriver
8mm wrench
on its back
door the
,
a r e
.
rack