Sentiotec CP-RM-HSR-4S Installationsanleitung Seite 7

Instructions for installation
5.2. Installing wooden parts on the mounting bracket
To do this, use the wood screws provided.
Step 6
Depending on requirements, you can put together the heater railing in the shape
of an L, U or O. To do this, use the wood screws provided.
7
8
Step 7
Screw the side panel 6 of the wood railing flush with the side panel 3 of
the bracket. If necessary, repeat this procedure on the opposite side.
Connect the side panel 3 of the bracket to the long bracket panel 5 with
the help of the corner bracket 4. If necessary, repeat this procedure on the
opposite side.
Screw the long wooden railing panel 8 and the short wooden railing panel
7 to the bracket panel 5. Make sure that it is flush with the side panel 6
of the wood railing.
5
4
p. 7/8
3
6
EN