Sentiotec CP-RM-HSR-4S Installationsanleitung Seite 3

Instructions for installation
2. Important information for your safety
2.1. Intended use
The CP-RM-HSR-4S bracket set allows a wooden railing to be fastened to the
Concept R mini sauna heater and to the auxiliary evaporator R black.
Depending on requirements, you can put together the heater railing in the sha-
pe of an L, U or O.
Any use exceeding this scope is considered improper use. Improper use can
result in injuries and damage to the product.
The CP-RM-HSR-4S bracket set is suitable for the following railing models:
2.2. General safety information
Item number
CP-RM-L-4S
CP-RM-N-4S
● Remove any residual packaging from the bracket. It could ignite during operation
of the sauna heater/evaporator.
● Install the railing bracket and the finished railing using a normal screwdriver.
The product may be damaged by use of a cordless drill.
● For your own safety, consult your supplier in the event of problems that are
not described in sufficient detail in the user instructions.
Description
LINDEN
wooden railing
WALNUT
wooden railing
Suitable heater /
evaporator models
CP-RM-35 / RM-45 /
CP-RM-60 /
CP-25-STP-B
p. 3/8
EN