Insert The Batteries - Tfa Cleo Bedienungsanleitung

TFA_No. 35.1176_Anleitung
Wireless Weather Station
• Remove the batteries if the device will not be used for an extended period
of time. Avoid contact with skin, eyes and mucous membranes when han-
dling leaking batteries. In case of contact, immediately rinse the affected
areas with water and consult a doctor.
CAUTION!
Important information on product safety!
• Unauthorised repairs, alterations or changes to the devices are prohibited.
• Do not expose the devices to extreme temperatures, vibrations or shocks.
• Clean the devices with a soft damp cloth. Do not use solvents or scouring
agents.
• The base station is suitable for indoor use only. Protect it from moisture!
• The transmitter is splashproof, but not watertight.
5. Elements
Base station (Receiver)
A: LCD display (Fig. 1):
A 1: Weather forecast with symbols
A 2: Battery symbol for the transmitter
A 3: Transmitter reception symbol
A 4: Outdoor temperature
A 5: MAX/MIN values
A 6: Outdoor humidity
A 7: Battery symbol for the base station
A 8: Time
20
22.05.2025 14:21 Uhr Seite 11
Wireless Weather Station
A 9: Indoor humidity
A 10: Indoor temperature
A 11: Atmospheric pressure trend
B: Buttons (Fig. 1+2):
B 1: LIGHT sensor button
B 2: SET button
B 3: + button
B 4: – button
B 5: MEM button
C: Housing (Fig. 2):
C 1: Stand
C 2: Battery compartment
D: Transmitter (Fig. 3):
D 1: Wall mounting hole
D 2: Battery compartment
6. Getting started

6.1 Insert the batteries

• Place the base station and the transmitter on a table at a distance of about
1.5 meters from each other. Avoid being close to possible sources of inter-
ference such as electronic devices and radio equipment. Remove the dis-
play protection film.
21