ECOVACS GOAT A1600 RTK Betriebsanleitung Seite 15

2 Assemble the Station
1� Place the Station on an open and flat lawn with no slope or rock�
Ensure that there are no objects (e�g� trees, balls or houses) within 2 m
on left and right, and 2 m in front of the Station�
2� If you want to remotely control your ECOVACS GOAT, put the Station
as close as possible to a place with strong Wi-Fi signal�
3� Make sure that the grass around the Station is no longer than 10 cm�
Overgrown grass may affect the recharging�
10cm
4� Insert the Pile into the Base Until you hear a "click"�
15 EN