DJI MATRICE 350 RTK Kurzanleitung Seite 5

Vorschau ausblenden Andere Handbücher für MATRICE 350 RTK:

indicate that the internal battery is activated

and charging started.

c. Charging the TB65 Intelligent Flight Batteries

and WB37 Intelligent Battery: insert the

batteries into the battery ports to start charging.

For the TB65 batteries, set the charging mode

to Storage, Ready-to-Fly, or Standard as desired.

Refer to the instructions in the battery station

or BS65 Intelligent Battery Station User Guide

for more information.

2. Preparing the Remote Controller

Mounting the WB37 Intelligent Battery

Push the rear cover release button to open the rear cover

Insert the WB37 battery into the battery compartment and push

forward until it clicks firmly in place

battery, press and hold the battery release button.

Checking the Battery Level

Press once on the power button to check the battery level of the

internal battery when powered off.

Powering On/Off

Press and then press and hold to power on/off the remote

controller. The remote controller needs to be activated before

using it for the first time. Follow the prompts to activate.

Adjusting the Antennas

Lift and adjust the antennas. The strength of the remote controller signal is affected by the position of the

antennas.

The remote controller cannot be powered on before activating the internal battery. The internal battery of the

remote controller can also be activated after mounting the WB37 battery.

. To remove the WB37