Technical Data; Operating Instructions - Hilti TE 705 Bedienungsanleitung

1
2
3
1
2
3
4
5
6
Printed: 07.07.2013 | Doc-Nr: PUB / 5071186 / 000 / 00
Hilti TE 705 breaker
Kit supplied with the machine:
Plastic case, cleaning cloth, Hilti insert tool
grease, operating instructions
Always wear ear Always wear pro- Always wear safety
protectors. tective gloves. glasses.

Technical data

Power input:
Voltage (versions):
Current input:
Frequency:
Machine weight:
Dimensions:
Hammering speed under load:
Single impact energy:
Chiselling performance in medium-hard concrete: 500 cm
Chisels:
Chuck:
Chisel cutting edge adjustment to 18 positions
Permanent lubrication
Adjustable side handle
On/off switch for continuous running
Electronic r.p.m. regulation for improved operating convenience
Hammering power regulation: max. = 100%, min. = 50%
Double insulation, class II
Service indicator with warning lamp
Sound and vibration information (according to EN 50144):
A-weighted sound power level:
A-weighted emission sound pressure level:
Ear protection must be worn
Typical weighted vibration at the handle:
Right of technical modifications reserved.
The respective regulations of your trade association and the enclosed safety precautions must
be observed.
Do not use this product in any way other than as directed by these operating instructions.
1030 W
100 V, 110 V, 115 V, 230 V, 240 V
11 A, 10 A, 5 A
50–60 Hz
6.5 kg
515×215×115 mm
1940/2740 blows/min.
4.3 joules / 8.5 joules
3 /min. with standard SM36 chisel
Pointed, narrow flat, wide flat, extra
wide flat, hollow, channel (narrow or
wide) scoop, in standard version
TE-Y
96 dB (A)
83 dB (A)
11 m/s 2