Relative Humidity Level Display (1-Temperature Model); Setting The Lighting Mode; Charcoal Filter Meter Display - Eurocave Inspiration Gebrauchsanweisung

Desactiver la tête de tirage au vide
6/ USING YOUR WINE CABINET FOR THE FIRST TIME
4
To remove a bottle at serving temperature
3 sec.
1
Turn the oxygen extraction bung to
closed position.
ête de tirage au vide
6
Desactiver la tête de tirage au vide
e de tirage au vide Turn off the air vacuum system:
If you no longer wish to use the air vacuum head, we recommend that you turn off the air vacuum system.
5
4
SET
SET
1
3 sec.
Press the button to confirm.
5
5
8
SET
SET
2
Select the air vacuum system icon with the
and keys.
6
7
SET
SET
3
Press the button to confirm.
7
7
SET
SET
V. Relative humidity level display (1-Temperature model)
Your wine cabinet has a function to measure humidity allowing you to
see the relative humidity level inside the appliance when the temperature
setting is 9 - 15°C. The ideal humidity level is above 50%, ideally 60 - 75%
8
(not settable).
SET
SET
30
GB
Desactiver la tête de tirage au vide
4
SET
SET
3 sec.
5
5
SET
SET
6
SET
SET
7
7
SET
SET
4
Press the and keys to turn off ( OFF)
8
SET
SET
5
Press the button to confirm.
The air vacuum system turns off. The icon
off.
If you want to increase the relative humidity level inside your cabinet, pour
the equivalent of a glass of water into the channel of the tray located on
the bottom right-hand side of the cabinet.
6/ USING YOUR WINE CABINET FOR THE FIRST TIME
VI. Setting the lighting mode
2
Take off the head to
SET
release the bottle.
1
Press and hold down the
3 secs.
3 seconds
SET
2
Press the or
menu.
You have 3 light setting options:
Permanent lighting (for mood lighting with a cabinet equipped with
a glass door for example).
Lighting activated when the door is opened (it is off when the
.
cabinet door is closed).
Lighting disabled.
Precautions to observe: bright light, never look directly into the LED beam.
VII. Charcoal filter meter display
turns
When replacing or using a filter for the first time:
SET
3 sec.
1
Press and hold down the
approximately 3 seconds.
2
SET
2
Select the charcoal filter pictogram
with the or
3
SET
3
Press the
countdown.
You can consult the meter at any time by repeating steps 1, 2, 3 then pressing the
3
Press
key for approximately
with the
keys to selectthe lighting
3
key for
5
Press the
keys.
button to see the charcoal filter
SET
then select the indicators
or keys.
SET
4
Press the button to confirm.
SET
4
Press the key to set to 365.
SET
button to confirm.
key to return to the main menu.
31
GB