Technical Data - AXENT E82.1000.0000.2 Bedienungsanleitung

TECHNICAL DATA

Nominal voltage
Power consumption
Power consumption standby
Protection degree
Protection class
Cable length
Flow Pressure Range
Adaptable Temperature Range
Adapaele Water temperature Range
Product Weight
Product Dimension ( L X B X H )
Load Sit and Lid ( Max. )
Max. flow rate Rear-shower
Max. flow rate Lady-shower
Spray arm position
Water temperature
Dryer temperature
Seat temperature
Approval
subject to change
LEG AL D I R ECTI O N S
This manual contains important information on the intended use, correct operation and proper maintenance of the equipment. Knowledge of and compliance with the inst-
ructions of this manual are provided for both the safe use of the equipment and for the safety of its operation and maintenance. In this manual, not all kinds of applications and
improper manipulations are considered. In addition, attention is drawn to the following: The content of these instructions is neither part of any previous or existing agreement,
commitment or legal relationship, nor does it change from an existing agreement, commitment or legal relationship. Any commitment by AXENT results from the respective
warranty. These include the complete and authoritative warranty obligation AXENT. The statements in this manual do not constitute an extension or a restriction of the
claims under the warranty provisions. This manual is protected by copyright. Copies and / or translations into other languages may be made only with prior written approval
of AXENT.
28
230V~/ 50Hz
1100W
ca. 0.5 W
IPX4
I
2.0m
0.07 – 0.75MPa
+5 to +40 C
0
+5 to +35 C
0
5.0 kg
523 x 376 x 142mm
150 kg
650 ml/min
650 ml/min
+31 to +39 C /AUS
0
+30 to +46 C /AUS
0
+29 to +37 0 C /AUS
EN 55014-1, EN 55014-2
EN 60335-1, EN 60335-2-84
EN 61000-3-2, EN 61000-3-3
EN 62233
5 levels
5 levels
5 levels
5 levels
5 levels
5 levels