AXENT E82.1000.0000.2 Bedienungsanleitung Seite 24

MAINTENANCE
22
C LE AN I N G C E R AM I C APPLIAN C ES
For ideal cleaning, the toilet seat can be removed.
First pull the main plug, then push the release button (mounting panel) and
then pull the toilet seat forward. Place it horizontally on the floor or a platform
without tilting it.
The water outlet does not need to be disconnected.
THE TOILET SEAT IS NOT ALLOWED TO BE TILTED. IT MUST
ALWAYS BE PLACED HORIZONTALLY.
C LE AN I N G/C HAN G E N OZZLE
The nozzle can be extended for cleaning.
CLEANING
During this procedure do not be seated on the unit.
Press « R ear Wash » on the control panel to extend the nozzle. The
Rear Wash nozzle gets rinsed automatically. Then pull the nozzle of the spray
arm while holding it.
Clean the nozzle and spray arm with standard descaling agent, if necessary
you can obtain a new nozzle for replacement at your specialty retailer.
Place the cleaned or new nozzle carefully on the spray arm, while holding it.
Press « S top » on the control panel to retract the spray arm. The
Stop nozzles will get rinsed again.