Signal Input Selection Menu - Helix Conductor Bedienungsanleitung

3. Operating the CONDUCTOR / PRO

3.3 Signal Input selection menu

The "Signal Input selection" menu lets you switch between the signal sources connected to the DSP / DSP amplifier.
The menu starts with the currently selected or most recently active input.
Actions:
Turn: Select signal input
Long press: Activate signal input
LED feedback:
Green: Main input
Yellow: Digital optical input
Orange: Digital coaxial input (Input can only be selected when the optical digital input is activated / see below)
Blue: Extension Card 1 (HEC1)
Turquoise: Extension Card 2 (HEC2 – only BRAX DSP)
Main input
Note: The CONDUCTOR automatically detects the signal inputs of the connected DSP / DSP amplifier. Only the avail-
able signal inputs can be selected. All other inputs are not displayed by LED feedback and cannot be selected.
32
Digital optical
input
With digital input activated,
press long to
between optical and coaxial
input
Digital coaxial
input
HEC1
switch
HEC2