HELIX CONDUCTOR Bedienungsanleitung Seite 30

3. Operating the CONDUCTOR / PRO
Volume 1
Turn: Adjust volume
Long press: Mute / demute
Double-press: Next track*
Triple-press: Previous track*
Extra-long press (5 sec.): Start Bluetooth pairing*
Short press 1x
Bluetooth Playback Control*
Long press: Play / pause
Left turn: Previous track
Right turn: Next track
Extra-long press (5 sec.): Start Bluetooth pairing
Short press 1x
Sound Setup selection
Turn: Select Sound Setup
Long press: Activate Sound Setup
Colors: Green (active), yellow (inactive), red (not available)
Short press 1x
Signal Input selection
Turn: Select signal input
Long press: Activate signal input
Colors: Green (main), yellow (digital input), blue (HEC1),
turquoise (HEC2)
Activating digital coaxial input
Digital optical input (yellow) is activated
Long press: Switching between optical
and coaxial input (orange)
Note: Menu navigation is cyclic. The menu sequence begins in the present menu.
30
Short press 1 x
Extra-long press (5 sec.): Start Bluetooth pairing*
Short press 1x
Extra-long press (5 sec.): Start Bluetooth pairing*
Short press 1x
Extra-long press (5 sec.): Start Bluetooth pairing*
Short press 1x
Short press 1 x
Long press: Switch ToneControl frequency range
Colors: Lila (Low Frequency), yellow (high frequency)
Volume 2
Turn: Adjust volume
Long press: Mute / demute
Double-press: Next track*
Triple-press: Previous track*
Volume 3
Turn: Adjust volume
Long press: Mute / demute
Double-press: Next track*
Triple-press: Previous track*
Volume 4
Turn: Adjust volume
Long press: Mute / demute
Double-press: Next track*
Triple-press: Previous track*
ToneControl
Turn: Adjust ToneControl gain
*Only for devices with an optionally installed Extension Card BT