Commodore 1802 Bedienungsanleitung Seite 17

connector(s) on your computer. See your computer's user manual if you
don't know where this connector is.
To connect a three-jack cable to the rear of the monitor, followthese instruc­
tions, which clarify the diagrams:
1. Plug the rounded end with eight PINS inside (the larger end of the cable)
into the VIDEO connector port on your computer. Make sure the small
dent on the metal end of the cable that you plug into the computer is facing
up, and push the cable end firmly in.
2. Plug the three jack ends of the cable into the three sockets on the back
of the monitor.The jacks and the sockets are colour coded:
• the white output jack plugs into the AUDIO I or II socket (white) on the
monitor.
• the yellow output jack plugs into the luma or monochrome socket
(yellow).
• the red output jack plugs into the chroma soket (red).
3. Set the video mode switch to sep (for separated luma and chroma) for
a sharp color 40-column picture display.
English
15