Herunterladen Diese Seite drucken

VEVOR RI-160DCDK Originalanleitung Seite 11

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
structure, clear of obstruction.
7)Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer
8)Do not damage the refrigerant circuit.
9)Do not use electrical appliances inside the food storage compartments of
the appliance, unless they are of the type recommended by the
manufacturer.
10)The appliance shall not be installed in public corridors or lobbies.
11)Please according to local regulations regarding disposal of the
appliance for its flammable gas. Before you scrap the appliance, please
take off the doors to prevent children trapped
12)the appliance shall be installed in accordance with national wiring
regulations
13)The appliance is to be installed in accordance with the Safety Standard
for Refrigeration Systems, ANSI/ASHRAE 15.
14)Do not use means to accelerate the defrosting process or to clean,
other than those recommended by the manufacturer.
15)The appliance shall be stored in a room without continuously operating
ignition sources(for example: open flames, an operating gas appliance or
an operating electric heater.
16)Do not pierce or burn. Be aware that refrigerants may not contain an
odour.
17)The appliance shall be stored in a well-ventilated area where the room
size corresponds to the room area as specified for operation;
18)The appliance shall be stored in a room without continuously operating
open flames (for example an operating gas appliance) and ignition sources
(for example an operating electric heater).
19)The appliance shall be stored so as to prevent mechanical damage
from occurring.
20)Check that cabling will not be subject to wear, corrosion, excessive
pressure, vibration, sharp edges, or any other adverse environmental
effects. The check shall also take into account the effects of aging or
continual vibration from sources such as compressors or fans.
21)Before carrying out Decommissioning procedure, it is essential that the
loading