General Notes On Safety; Use Of The Machine For Purposes For Which It Is Intended; Incorrect Use; Symbol Legend - Beveltools Mini Mite Rabis-M 3.0 Betriebsanleitung

1.1 General notes on safety

This operation manual is applicable for the machine Mini Mite
The machines may only be handled by personnel who is qualified. Always wear protective clothing, safety shoes,
safety glasses and ear protection.
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
WARNING
result in a serious injury or fire. Save all warnings and instructions for future reference.

1.2 Use of the machine for purposes for which it is intended

The machines are intended for the purpose of milling metal and plastic materials without the use of water. The
machines are pneumatic, handheld machines for machining steel, aluminum, aluminum alloys, brass and plastic for
commercial use in industrial applications, for manual weld preperations and for making visible edges in installation-
and machine building.

1.3 Incorrect use

All uses other than those described under section 1.2 are regarded as incorrect use and are therefore not admissible.

1.4 Symbol legend

Note on safety / Warning
!
This information serves to achieve safe operation. Failure to observe this information may compromise the operator's
safety.
Information
i
This information serves for a good understanding of the operation of the product, thereby permitting full exploitation
of the operational potential of the product.
Technical Document
Read the technical document prior to commissioning.
Safety glasses and ear protection
Wear safety glasses and ear protection.
Disposal
Friendly-to-the-environment disposal.
EN
RABIS-M 3.0
™
2