Bruno Boxspringbed Instruktionshandbuch Seite 41

CAUTION!
Risk of cutting – Only use the enclosed safety cutter!
Only the enclosed safety cutter may be used to open the packaging.
Other sharp tools such as cutters or scissors pose a high risk of injury
and can damage the bed.
Heavy load – assembly only with two people!
The Boxspringbed is heavy and bulky. Always lift and transport it with a
second person to avoid injuries to the back or joints.
Risk of splinters!
Due to the wooden construction, it is possible to catch wood splinters
when handling or assembling. Wear suitable protective gloves.
ATTENTION!
Be careful when hanging the headboard!
Hang the head section carefully to avoid damaging the valance. Ensure
that it is correctly positioned before fixing it in place.
Stable base required!
The bed must be assembled on a level and stable surface. Use the en-
closed feet to ensure a safe and even load distribution and to prevent
damage to the bed or floor.
Felt glides must be used!
Please use the felt glides supplied for the feet of the bed to avoid da-
maging the floor.
Risk of damage due to improper opening!
Use the safety cutter carefully to avoid damaging the fabric, upholstery
or other bed components. Only cut at the intended points.
REFERENCE
For detailed assembly instructions, please refer to the other sections of
these construction manual.
NOTICE
Check the stability regularly!
Check the stability of the bed at regular intervals. In particular, check
that the headboard is firmly in place and that the bed legs are securely
screwed down. If necessary, tighten all connections to ensure long-
term stability.
41