HOMCOM B31-391 Bedienungsanleitung Seite 2

1-Protection class I: The fitting has an earthing connection: The earth wire (yellow
/green ) has to be connected to the clip marked with .
2-This fitting should only be installed in rooms where direct contact with water is
impossible.
3-Consumption in w, according to the speed of the motor.
4-May be operated with a remote control.
WARNINGS
•Read entire booklet carefully before beginning installation and save these
instructions.
•To reduce the risk of personal injury, attach the fan directly to the support structure
of the building according to these instructions, and use only the hardware supplied.
•To avoid possible electrical shock, before installing your fan, disconnect the power
by turning off the circuit breakers to the outlet box and associated wall switch
location.
•All wiring must be in accordance with national and local electrical codes. If you are
unfamiliar with wiring, you should use a qualified electrician.
•To reduce the risk of personal injury, do not bend the blade attachment the system
when installing, balancing or cleaning the fan. Never insert foreign objects between
rotating fan blades.
•To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the
fan by the lead wires.
•Ensure that when mounting the ceiling fan that the fixing can support the moving
weight of the fan which is 15.8kg(35lb) minimum.
•The fan blades cannot be installed lower than 2.3m from the floor.
NOTE:
The important precautions, safeguards and instructions appearing in this manual
are not meant to cover all possible conditions and situations that may occur. It must
be understood that common sense, caution and carefulness are factors which
cannot be built into this pro- duct. These factors must be supplied by the person(s)
installing, caring for and operating the unit.
1