Cam Title Menu - Eneo VKC-1327B-IR/W3 Installation Und Betriebsanleitung

SPECIAL Factory Default Descriptions
SYNC INT
LANGUAGE ENGLISH
OSD COLOR 3

5.8.1 CAM TITLE Menu

To enter CAM TITLE menu, press
Up to 5 characters from the character table can be input.
Use , , ,
Press button to select and the selected character will be input and displayed on CAM TITLE input line.
To move the input position CAM TITLE input line, press
To clear CAM TITLE input line, press
To set the location of CAM TITLE to be displayed on the video, press
and then menu disappears and CAM TITLE will be displayed on the video.
Use , , ,
Menu will appear again.
To finish CAM TITLE menu, press
Fixed to INTERNAL synchronization
ENGLISH, KOREAN, JAPANESE, CHINESE , CHINESE  are available.
When changing LANGUAGE, select language and press
new fonts. It takes about 8 seconds to load new language fonts.
OSD COLOR can be set to one of 6 colours.
button at MAIN > SPECIAL > CAM TITLE > ON
buttons to move cursor (blink character is on the cursor position) in the character table.
button on CLR on command line.
buttons to locate CAM TITLE at the proper position and press
button on RET on command line.
button on
button on POS on command line
4
button to load
Command line
CAM TITLE input line
.
button to fix.